SMS nonwoven is spunbond + meltblow + spunbond nonwoven, which is made of spunbond + meltblown + spunbond nonwoven by hot rolling.
Normal gram weight range: 30-500 g / m2;
Basic width: 1500mm and 2400mm; it belongs to composite non-woven fabric, which is a composite product of spunbond and melt blown, non-toxic and tasteless, and highly effective bacteria isolation.
Through the special treatment of the equipment, it can achieve the performance of antistatic, anti alcohol, anti plasma, water repellent and water producing.
1.Thin SMS products, because of its waterproof and air permeability, are especially suitable for the health market, such as sanitary napkins, sanitary pads, baby diapers, adult incontinence diapers, etc.
2.SMS products of medium thickness are suitable for medical use, such as surgical clothing, surgical bag cloth, surgical cover cloth, sterilization bandage, wound dressing, plaster, etc. they are also suitable for industrial use, such as work clothes, protective clothing, etc. SMS products have been widely used in the world because of its good isolation performance, especially after three anti-static and anti-static treatment.
3.Thick SMS products are widely used as efficient filtering materials for various gases and liquids, as well as excellent high-efficiency oil absorption materials. They are used in industrial wastewater degreasing, marine oil cleaning and industrial rags.
4.SMMS is made of spunbonded nonwoven + melt blown nonwoven + melt blown nonwoven + spunbonded nonwoven, and four layers of fiber web.
5.It has all the characteristics of common SMMS non-woven fabric; anti alcohol up to 10 (i.e. 100% anti alcohol); anti-static ability up to 108-1012; anti oil; anti plasma; anti-corrosion ability up to 100%;
6.It is mainly used in operating clothes, operating hole towel, operating bag cloth, medical bed sheet, hand washing clothes, isolation clothes, experimental clothes, advanced protective clothing and other protective products. Different colors can be made according to different customers' preferences.
7.The medical non-woven fabric SMMS uses 100% polypropylene chip as raw material, which is non-toxic, no fiber shedding, high effective bacteria resistance rate, good uniformity and plumpness of cloth surface, which can effectively improve the product quality.
8.SMMS can replace pure cotton fabric with soft, delicate and good skin affinity. The spunbond layer is composed of continuous filament and has good breaking strength and elongation. The meltblown layer is composed of continuous superfine fibers, which has good barrier effect on moisture, bacteria and dust. It has high water pressure resistance, good air permeability, good acid and alkali resistance. It is suitable for high and low temperature sterilization; it is disposable without recycling and cleaning; it meets the requirements of environmental protection and is easy to degrade or burn; it can effectively prevent hospital cross infection, reduce the hidden cost of treatment and improve the infection control rate; it has no repeated use and damage consumption; it has no washing cost; it can be stored under qualified conditions and has a sterile validity period of 180 days.
9.The fabric for disposable protective clothing is mainly made of SMMS material, with excellent protective performance, ventilation and comfort. In addition, the main material of microporous protective clothing is coated non-woven fabric, which has the characteristics of anti microbial penetration and good blood permeability.
